6.5 Inch Small Block Ford Harmonic Balancer Internally Balanced

6.5″ Small Block Ford Internally Balanced 4 Bolt Damper #204

Name: 6.5" Small Block Ford Internally Balanced 4 Bolt Damper #204
SKU: 25
Availability: InStock

$510.00 – $700.00

The #204 Balancer is designed for use in internally balanced SBF engines. The Balancer utilizes the stock late model 4 bolt pulley pattern and the spacing matches the 86-93 Mustang accessory system. This Balancer is best matched for stock or modified engines producing up to approximately 1000 hp Naturally Aspirated (up to 1500 hp with power adder). For applications over 1000 hp NA please look at the #207 Race Balancer. For applications over 1500 hp with a supercharger please look at the #213 Super Duty Damper.

NOTE: For engines using a Jesel belt drive, you will need to order the standard length hub and then have the hub shortened .200″ in order to keep the front face of the damper in stock location for serpentine accessory alignment.

NOTE: The Blower Hub option is a thicker hub that provides greater resistance to hub cracking on supercharged applications (12# of boost or more). This option includes a new custom made timing cover seal to adapt the oversized hub to a stock timing cover.

More Product Details

Hub Style

Hub Length

Crank Trigger Magnets

Clear

Double 3/16" Keyway Add On

Add an additional 3/16 Keyway to your Damper. Required the crankshaft to be machined for a second keyway 180* out from the original keyway. *Requires damper purchase. This is a labor option for new damper purchase only.

Add for $30.00

3/16" x 1/4" Keyway Add On

Add an additional 1/4" Keyway to your Damper. Required the crankshaft to be machined for a second keyway 180* out from the original keyway. (Requires a Blower/Super Duty Hub or BBC Crank Snout) *Requires damper purchase. This is a labor option for new damper purchase only.

Add for $30.00

SKU: N/A Category: SBF Windsor

Specifications
Instructions

Damper Weight	7.2 lbs
Case Outer Diameter	6.500″
Cover Diameter	6.600″ Standard Cover
	7.000″ Flying Magnet Cover
Damper Length	3.950″ (Standard Hub, OEM 85-93 SBF Length)
	3.750″ (Hub modified for Jesel Belt Drive)
	3.550″ (Hub modified for IW or DB Belt Drive)
Hub OD	1.875″ Stock Hub
	2.065″ Blower Hub
Hone Size	1.374″ (1.375″ Stock Crank OD)
Pulley Bolt Pattern	4 x 3/8″-16 on 3.300″ Bolt Circle
Pulley Register	Male 2.382″ OD (OEM SBF)
SFI Rating	Exceeds SFI 18.1 standards and is marked on front with SFI Sticker, and on the rear with SFI number stamped into unit.