LSX 10% Overdrive 10-Rib with 6-Rib Accessory Drive Pulley Harmonic Damper for Corvette, Pontiac G8 and CTS-V
LSX 10% Overdrive 10-Rib with 6-Rib Accessory Drive Pulley Harmonic Damper for Corvette, Pontiac G8 and CTS-V LSX 10% Overdrive 10-Rib with 6-Rib Accessory Drive Pulley Harmonic Damper for Corvette, Pontiac G8 and CTS-V Side View

LSX 10% Overdrive 10-Rib with 6-Rib Accessory Drive Pulley Harmonic Damper for Corvette, Pontiac G8 and CTS-V

Part# 8404
Only $575.00
Options:

NOTE: Innovators West specific pin kit required when used with a stock non-keyed crankshaft.

SFI 18.1 Harmonic Damper for LS1, LS2, LS3, LS6 Corvette, Pontiac G8 & Cadillac CTS-V w/Crank Bolt. Features 10-Rib drive & 10% Overdrive Pulley.

This damper comes standard with 3/16" Keyway for use with aftermarket crankshafts. Complete Pulley Conversion Kit also available, see options below.

 

Options

  • Dual Keyway Option - Add $20.00
    The double keyway option requires that the factory or aftermarket crankshaft be removed from the engine and a second keyway cut into the snout of the crankshaft. DO NOT run a double keyed damper on a crankshaft without the double keys. Failure to the damper hub can happen without the supporting key in the broached keyway slot. The dual keyway option is for Supercharged or Extreme Duty Applications (typically over 750 rwhp). Without the double key modification your crankshaft in these high horsepower applications can lead to the failure of the damper hub and/or the single keyway which results in damage to the damper and the crankshaft snout.
  • LS Corvette Crank Pin Kit - Add $75.00
    #966 Crankshaft Pin Kit for Corvette LS1/2/3/6 Engines. Will not work with LS7 engine. Designed for use with Innovators West dampers. For Stock Crankshafts Only.
  • #903 LS1/LS2/LS6 Corvette 10-Rib Conversion Kit - 10% Overdrive
    Conversion Kit Includes: Harmonic Balancer, P/S, Alt, Smooth Idler & Ribbed Tensioner Pulleys
  • LSX Blower Hub Option - Add $25.00
    The super duty hub has increased material for supercharged applications.This increased material helps to protect the hub from cracking in high load applications. The super duty hub is recommended for supercharged applications making over 750 rwhp. Includes matching timing cover oil seal.

Details

  • Diameter: 8.125"
  • Weight: CALL
  • 10% Overdrive
  • 10-Rib Main Pulley
  • 6-Rib Accessory Pulley
  • Exceeds SFI 18.1 standards and is marked on front with SFI Sticker, and on the rear with SFI number stamped into unit.

Reference